Wedge Anchors Zinc Coated
Description
The Ankr-TITE Wedge Anchor is a high-strength, fully threaded, and torque-controlled expansion anchor designed for anchoring into normal-weight concrete, lightweight concrete, and grouted concrete masonry. Drill size is the same as the bolt size. Plating is Zinc
Wedge Anchor Installation
Drill the hole, whose diameter equals the anchor diameter. To assure full holding power, do not ream the hole or allow the drill to wobble. When possible drill 2 diameters deeper than intended embedment.
Clean the hole with a nylon brush and compressed air.
Assemble the nut and washer onto the anchor. Drive the anchor through the material to be fastened.
Tighten the nut, or head, 3 to 5 turns past the hand tight position. Installing with a torque wrench is recommended for optimum performance.