1
Skip to main content

Hex Sleeve Anchor

Hex Sleeve Anchor

Hex Sleeve Anchor

Installation

Drill a hole in your base material to your specified embedment depth, clean out the drilled hole, insert anchor into fixture and drive into hole until washer and nut are against fixture. Then tighten the hex nut on anchor to required torque amount to set anchor.

**OVERSIZED WHOLES WILL COMPROMISE THE ANCHORS PERFORMANCE

Anchor Diameter: 5/16", 3/8’’, 1/2"

Drill Bit Diameter: 5/16", 3/8’’, 1/2"

Body Material: Carbon Steel

Finish: Zinc Plated

Min. Concrete thickness: 1.5 X embedment depth

Install Torque ft-lb: 5/16"-8lb, 3/8"-15lb, 1/2"-25lb

 

Ultimate Tension Load: 5/16"-1,120 lb., 3/8"-1,500 lb., 1/2"-3,160 lb.

Ultimate Shear Load: 5/16"- 2,160 lb., 3/8"-3,080 lb., 1/2"-5,000 lb.

Length/Size Price/Each Qty
5/16 x 1 1/2 $ 0.78
5/16 x 2 1/2 $ 0.87
3/8 x 1 7/8'' $ 1.07
3/8 x 3'' $ 1.17
1/2 x 3 $ 1.85
1/2 x 4 $ 2.15
Length/Size Price/Pkg Qty Qty
5/16 x 1 1/2 $ 57.00 100
5/16 x 2 1/2 $ 66.00 100
3/8 x 1 7/8'' $ 40.00 50
3/8 x 3'' $ 43.50 50
1/2 x 3 $ 35.00 25
1/2 x 4 $ 40.50 25